What Does a Valerian Root Extract COA Need to Show?

Nov 13, 2026

Leave a message

I've reviewed thousands of Certificates of Analysis. The best ones tell a complete story; the worst ones are marketing documents with a lab coat. In 2020, a Canadian client forwarded me a valerian extract COA that looked impressive-full-color, branded, with a dozen test results. But when I looked closer, I realized it was missing the one test that mattered: valerenic acid content. The supplier had tested for everything except the active compound. This article is your guide to reading valerian COAs like a pro.

valerian-root-coa-raw-powder-sample

After fifteen years in plant extracts, I've reviewed thousands of Certificates of Analysis. The best ones tell a complete story; the worst ones are marketing documents with a lab coat. In 2020, a Canadian client forwarded me a valerian extract COA that looked impressive-full-color, branded, with a dozen test results. But when I looked closer, I realized it was missing the one test that mattered: valerenic acid content. The supplier had tested for everything except the active compound. This article is your guide to reading valerian COAs like a pro.

 

The Beton COA Framework: 8 Non-Negotiable Sections


Based on our experience auditing suppliers across China, Europe, and India, here's what every valerian extract COA must include:

 

Section 1: Identity Verification


Botanical name: Valeriana officinalis L. (not just "valerian")
Plant part: Root (not rhizome, not whole plant)
Extraction ratio: If applicable (e.g., 10:1)
Standardization: Specific percentage (e.g., 0.8% valerenic acids)
Appearance: Color, odor, texture
Red flag: "Valerian extract" without botanical name or part. We've seen suppliers sell "valerian extract" that was actually whole-plant powder.

 

Section 2: Active Compound Quantification


This is where most COAs fail. Here's what we require:

Analyte: Valerenic acid (specific, not "total valerenic acids" unless specified)
Method: HPLC with full method parameters
Column: C18, 5μm, 250×4.6mm (or equivalent)
Mobile phase: Acetonitrile:0.05% phosphoric acid (35:65)
Flow rate: 1.0 mL/min
Detection: UV 220 nm
Reference standard: USP Valerenic Acid RS
Result: Specific percentage with acceptance criteria
From our Xi'an lab: We validate every supplier's HPLC method against our in-house protocol. In 2023, we found 3 suppliers using UV spectrophotometry instead of HPLC-reporting "valerenic acid" that was actually total phenolics. The difference? Up to 400% overestimation.

 

Section 3: Heavy Metals

Element USP Limit EP Limit Beton Standard
Lead (Pb) ≤10 ppm ≤5 ppm ≤3 ppm
Arsenic (As) ≤10 ppm ≤2 ppm ≤1 ppm
Cadmium (Cd) ≤10 ppm ≤1 ppm ≤0.5 ppm
Mercury (Hg) ≤10 ppm ≤0.1 ppm ≤0.05 ppm

Critical note: USP limits are higher than EP. For European markets, ensure your COA meets EP standards. For US markets, USP is acceptable but we recommend EP-level testing for competitive advantage.

 

Section 4: Microbial Limits


Total aerobic count: ≤10,000 CFU/g (USP), ≤10⁴ CFU/g (EP)
Yeast and mold: ≤1,000 CFU/g (USP), ≤10³ CFU/g (EP)
E. coli: Absent in 1 g
Salmonella: Absent in 10 g
Staphylococcus aureus: Absent in 1 g
Pseudomonas aeruginosa: Absent in 1 g
Real data: In our 2023 audit, 15% of valerian extract samples failed microbial limits. The culprit? Improper drying (moisture >10%) leading to mold growth during storage.

 

Section 5: Pesticide Residues


Required for European markets and increasingly for US:

Organochlorines: ≤0.05 ppm (EP)
Organophosphates: ≤0.05 ppm (EP)
Pyrethroids: ≤0.05 ppm (EP)
Glyphosate: ≤10 ppm (EU)
From our experience: Chinese valerian from Gansu province typically shows lower pesticide residues than material from intensive farming regions. Always request pesticide screening for European-bound shipments.

 

Section 6: Physical/Chemical Properties


Moisture content: ≤10% (USP), ≤5% preferred
Particle size: D90 ≤100 mesh for capsules, D90 ≤40 mesh for tablets
pH: 4.0-6.0 (1% solution)
Solubility: Complete in water (for water-soluble extracts)
Color: Brown to yellowish-brown
Odor: Characteristic valerian odor

valerian-root-coa-lab-paperwork-audit

Section 7: Stability Data


The most overlooked section, and the most important for shelf-life planning:

Accelerated stability: 40°C/75% RH for 6 months minimum
Long-term stability: 25°C/60% RH for 12-24 months
Testing intervals: 0, 3, 6, 12 months
Parameters tested: Valerenic acid content, appearance, microbial limits
Our Xi'an stability data: We've tracked valerenic acid degradation in 15 different valerian extracts over 24 months. The average loss is 12% at 25°C/60% RH and 23% at 40°C/75% RH. Extracts with higher initial moisture degrade faster.

 

Section 8: Documentation and Traceability


Batch number: Unique, traceable
Manufacturing date: Not just "packaged on"
Expiry date: Based on stability data, not arbitrary
Country of origin: Specific region, not just "China"
Manufacturer name and address: Not just distributor
Analytical lab accreditation: ISO 17025, CNAS, or equivalent
Signature and date: Authorized person, not just stamp


The Beton COA Red Flag Checklist


When reviewing valerian extract COAs, these are immediate deal-breakers:

❌ No valerenic acid content (the #1 missing test)
❌ "Total valerenic acids" when you asked for valerenic acid
❌ No HPLC method parameters
❌ Missing heavy metals panel
❌ No microbial limits
❌ Stability data missing or <6 months
❌ No manufacturing date (only packaging date)
❌ Vague origin ("China" instead of province)
❌ No lab accreditation
❌ Results without acceptance criteria

valerian-root-coa-analytical-balance-testing

Real-World COA Examples: Good vs. Bad


Example 1: The Good COA

✅ Botanical name: Valeriana officinalis L.
✅ Valerenic acid: 0.82% (specification: ≥0.8%)
✅ HPLC method: C18, acetonitrile:0.05% phosphoric acid, UV 220 nm
✅ Heavy metals: Pb 2.1 ppm, As 0.8 ppm, Cd 0.3 ppm, Hg 0.02 ppm
✅ Microbial: All within limits
✅ Stability: 6 months at 40°C/75% RH, valerenic acid retention 94%
✅ Origin: Gansu Province, China
✅ Lab: ISO 17025 accredited
Example 2: The Bad COA

❌ Botanical name: "Valerian extract"
❌ Valerenic acid: Not tested
❌ Method: "UV spectrophotometry" (not HPLC)
❌ Heavy metals: "Compliant" (no actual numbers)
❌ Microbial: Not tested
❌ Stability: Not provided
❌ Origin: "China"
❌ Lab: No accreditation listed


The Cost of a Bad COA


In our experience, a missing or misleading COA costs:

Reformulation: $5,000-50,000 per batch
Delayed launch: 3-6 months
Regulatory rejection: $10,000-100,000
Recall: $50,000-500,000
Reputation damage: Incalculable
Real example: A US brand received valerian extract with a COA showing "valerenic acids 0.8%" by UV spectrophotometry. When they retested by HPLC, the actual content was 0.34%. The batch failed USP specifications. Cost: $28,000 in reformulation and a 4-month delay.

 

Bottom Line for B2B Buyers


A COA is a legal document, not a marketing brochure. For valerian extract, demand:

Complete identity verification with botanical name
HPLC-based valerenic acid quantification with full method parameters
Heavy metals panel with specific limits (not just "compliant")
Microbial limits for all required organisms
Stability data for your shelf-life requirements
Full traceability from origin to batch number
The 30 minutes you spend reviewing a COA thoroughly will save you months of headaches. In our experience, 40% of valerian extract COAs from new suppliers have at least one critical omission. Don't let yours be the one.

 

References


USP Monograph: Powdered Valerian Extract. https://doi.usp.org/USPNF/USPNF_M87570_05_01.html
European Pharmacopoeia 11.0: Valerian Root. https://www.scribd.com/document/832396667/Valerian-root-cut
FDA Guidance for Industry: Botanical Drug Products. https://www.fda.gov/regulatory-information/search-fda-guidance-documents/botanical-drug-development-guidance-industry
ISO 17025: General Requirements for Testing and Calibration Laboratories. https://www.iso.org/standard/66912.html

Send Inquiry